Introduction, Dell fluid cache for das (direct-attached storage), Solution design and architecture – Dell PowerVault MD1200 User Manual
Page 6
Improving NFS Performance on HPC Clusters with Dell Fluid Cache for DAS
6
1. Introduction
A Network File System (NFS) based storage solution is a popular choice for High Performance
Computing Clusters (HPC). Most HPC clusters use some form of NFS irrespective of the size of the
cluster. NFS is simple to configure and administer, free with virtually all Linux distributions, well-
tested, and can provide reliable storage for user home directories and application data. A well-tuned
NFS solution can provide great performance for small to mid-sized clusters.
drives provide large capacity and good performance for a reasonable price, optimizing the GB/$
metric. However, they limit performance for applications that have random I/O patterns.
Cache for DAS (Direct Attached Storage) reduces this limitation by caching data while the backend
storage services the I/O request, thus improving the performance of the entire NFS storage solution.
This study evaluates Dell Fluid Cache for DAS (DFC)
with NFS for HPC clusters. A cluster-level study
was conducted to analyze different I/O characteristics and quantify the performance improvements
gained with DFC when compared to the same NFS configuration without using DFC. All the results
presented in this document are measured results that were obtained in the Dell HPC laboratory.
The following section introduces the DFC technology. Subsequent sections describe the design of the
storage solution and the tuning optimizations applied to the solution. Information is provided on tools
that can be used to monitor the solution. An analysis of the performance results follows. The paper
concludes with recommendations on best-fit use cases for DFC with NFS.
Two appendices that provide step-by-step instructions on how to configure such a solution and provide
information on the benchmarks and tests that were run for this study complete this document.
1.1. Dell Fluid Cache for DAS (direct-attached storage)
DFC is a write-back host caching software. DFC combines multiple Dell PowerEdge™ Express Flash PCIe
SSDs to provide a read and write cache pool. This PCIe SSD cache pool is used to accelerate response
times with significant improvements in I/O operations per second (IOPS).
Some features of the DFC software include:
• Faster cache reads, writes, read-after-writes, and re-reads
• Data protection as writes are replicated across multiple PCIe SSDs
• Orderly hot swap and hot plug capability that allows adding or removing a device without
halting or rebooting the system
More details on the Dell Fluid Cache for DAS technology can be found at [3].
In an HPC context, the DFC software can be configured on a NFS server. PCIe SSDs on the NFS server
will provide the virtual cache pool.
2. Solution design and architecture
This section describes the NFS storage solution used to evaluate the DFC technology. The baseline for
comparison is an NFS server with direct-attached external SAS storage. The configuration of this NFS
server is augmented with PCIe SSDs and DFC software for the DFC comparison. A 64-server Dell
PowerEdge cluster was used as I/O clients to provide I/O load to the storage solution. The following