Dell Dimension 5100 - Manual (Page 57)

3. Grasping the sliding plate lever, slide and hold the sliding plate until the drive panel snaps open.
4. Pivot the drive panel outward and lift away from the computer.
5. Set the drive panel aside in a secure location.
Removing the Drive-Panel Insert
1. Follow the procedures in " Before You Begin ."
2. Remove the computer cover .
3. Remove the drive panel .
1. Turn the drive panel sideways and find the tip of the drive-panel insert tab that latches over a tab on the right side of the drive panel.
2. Pull the inner tip of the drive-panel insert tab away from the drive panel.
1 sliding plate lever 3 drive panel
2 sliding plate 4 front panel
NOTE: The sliding plate secures and releases the drive panel and helps to secure the drives.
1 drive-panel insert tab
2 drive-panel insert
3 drive panel