Dell Dimension 5100 - Manual (Page 58)

3. Pivot the drive-panel insert out and away from the drive panel.
4. Set the drive-panel insert aside in a secure location.
Replacing the Drive-Panel Insert
1. Slide the tab on the left side of the drive-panel insert under the center-drive panel tab.
2. Rotate the drive-panel insert into place and snap the drive-panel insert tab over the corresponding tab on the drive panel.
Replacing the Drive Panel
1. Follow the procedures in " Before You Begin ."
2. Remove the computer cover if you have not already done so.
3. If you are installing a replacement drive panel, remove the old drive panel .
4. Align the drive panel tabs with the side-door hinges.
5. Rotate the drive panel toward the computer until it snaps into place on the front panel.
1 drive-panel insert tab 3 center drive-panel tab
2 drive panel insert 4 drive panel
1 sliding plate lever 3 drive panel
2 sliding plate 4 front panel