Heat-sink assembly, Removing the heat-sink assembly – Dell Dimension 5100 User Manual
Page 70
5.
Connect the power and data cables to the drive.
6.
Check all cable connections, and fold cables out of the way to avoid blocking the fan and cooling vents.
7.
.
8.
Replace the
computer cover
.
9.
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
10.
Enter system setup and select the appropriate Drive option.
11.
Verify that your computer works correctly by running the
Dell Diagnostics
.
Heat-Sink Assembly
Removing the Heat-Sink Assembly
NOTICE:
To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.