Dell Inspiron 17 (N7010, Mid 2010) - Manual (Page 28)

6. Replace the display assembly (see Replacing the Display Assembly ).
Hinge Caps
Removing the Hinge Caps
1. Follow the instructions in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display bezel (see Removing the Display Bezel ).
4. Remove the display panel (see Removing the Display Panel ).
5. Remove the display hinges (see Removing the Display Hinges ).
6. Press the hinge cap to release the hinge cap tabs from the slots on the display hinges.
7. Lift the hinge cap off the display hinges.
Replacing the Hinge Caps
1. Follow the instructions in Before You Begin .
2. Place the hinge caps on the display hinges and snap them into place.
3. Replace the display hinges (see Replacing the Display Hinges ).
4. Replace the display panel (see Replacing the Display Panel ).
5. Replace the display bezel (see Replacing the Display Bezel ).
6. Replace the display assembly (see Replacing the Display Assembly ).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
1 display hinges (2) 2 hinge caps (2)
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.