Replacing the i/o board – Dell Inspiron 17 (N7010, Mid 2010) User Manual
Page 36
Replacing the I/O Board
1.
Follow the instructions in
Before You Begin
.
2.
Align the connectors on the I/O board with the slots on the computer base and press the I/O board until it is seated fully.
3.
Replace the middle cover (see
Replacing the Middle Cover
).
4.
Replace the display assembly (see
Replacing the Display Assembly
).
5.
Replace the processor fan (see
Replacing the Processor Fan
).
6.
Connect the I/O board cable to the connector on the system board.
7.
Replace the palm rest (see
Replacing the Palm Rest
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Follow the instructions from
step 5
to
step 7
in
Replacing the Hard Drive
.
10.
Replace the module cover (see
Replacing the Module Cover
).
11.
Replace the optical drive (see
Replacing the Optical Drive
).
12.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
I/O board
2
I/O board cable
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.