Factory default settings – Dell 4350 Network Access Point User Manual
Page 106

Back to Contents Page
Factory Default Settings:
Dell™ Wireless 4350 Access Network Access Point User's Guide
Dell pre-configures the Dell Wireless 4350 Small Network Access Point with the following settings:
NOTE:If you lose track of the device settings, you can reset the router by pushing the reset button to restore these settings back
to your router.
Setting
Default
User Name
admin
Password
admin
AP Host Name
Dell_4350_AP
IP Address
Static IP address of 192.168.2.2
Subnet Mask
255.255.255.0
ESSID (wireless network name)
wireless
Channel
auto
Encryption
No Encryption
Guest Mode
Disabled
NOTE:Your Dell Wireless 4350 Small Network Access Point comes with factory default settings that should work for the majority
of the network usage scenarios. However, there are cases where your network environment may require a different
configuration.
Back to Contents Page