Dell 4350 Network Access Point - Manual (Page 175)

To enable access control in the access point, perform the following steps:
1. Click Yes to enable Enable MAC Access Control.
2.
Click Yes to enable the appropriate table, the Grant Access Table or the Deny Access Table.
3. Click the Add button, a pop-up window will open, then enter the MAC address of the network card on the computer that you
wish to add to the table.
4. Click Submit to enter the MAC address into the table.
5. Click Submit to enable the new table’s entries.
6. To remove an existing rule, click to select edit beside MAC address.
7. A pop-up window will open and click the DEL button to remove it.
NOTE:The Access Control Settings apply to wireless client computers.
Back to Top
Administration Settings
The Administration Settings page allows the user to change the password settings for administrator access to the Dell Wireless 4350
Small Network Access Point.
Administration Settings