Diagnostics – Dell 4350 Network Access Point User Manual
Page 207
NOTE:The system configuration files can only be used by the Control Utility on Dell Wireless 4350 Small Network Access
Points.
NOTE:Do not use the Control Utility to import configurations settings files created by the web based configuration tool.
Change Password
To prevent unauthorized administration changes to the access point, the access point is password protected. It is strongly
recommended that you change the factory default password.
1.
Click the To Change the Access Point Password button. The Password Settings window appears.
2.
Type the original password in the Original Password field.
3.
Type the new password in the New Password field, and then retype it in the Confirm Password field to verify.
4.
Type the password hint message in the Password Hint Message field.
5.
Click the Submit button when you finish the setting. If you want to clear any values you have entered in any field, click the
Cancel button.
Upgrade to New Firmware
If you are instructed to upgrade the firmware, click the Upgrade to New Firmware button. It will connect to the Dell website to
upgrade to the latest firmware release. It is unnecessary to upgrade the firmware if your access point is working properly.
Diagnostics
Diagnostics