Setup wizard, Introduction, Launch the setup wizard – Dell 4350 Network Access Point User Manual
Page 107: Back to top
Back to Contents Page
Setup Wizard: Dell™ Wireless 4350 Small Network Access Point
User's Guide
Introduction
The Setup Wizard is an easy-to-use program included on your Dell Wireless 4350 Small Network Access Point CD. It provides
simplified steps for configuring the Access Point. The Setup Wizard displays a series of graphical illustrations on how to connect
the Access Point to your computer. It presents the user with the option of changing wireless parameters (such as SSID, channel
number, IP address) and enabling WEP security. Finally it applies these settings to your access point and validates its
configuration. At this point the access point is ready to be connected to the network. If the configuration cannot be completed
successfully, the Setup Wizard will display troubleshooting instructions to guide you through the configuration process.
In addition, the Setup Wizard also supports the installation of the Control Utility and provides links to the user's guide on the Dell
Wireless 4350 Small Network Access Point CD and the Dell support website.
Launch the Setup Wizard
To run the Setup Wizard, perform the following steps:
Insert the CD
1.
Insert the Dell Wireless 4350 Small Network Access Point CD into the CD drive of a computer. Your CD should
automatically launch the Setup Wizard. If it does not, complete the following steps to start the Wizard.
a.
Click the Start button, and then click Run.
b.
Type the following text in the Open: field: