Dell Vostro 1220 (Mid 2009) - Manual (Page 19)

Back to Contents Page
Media Bay Device
Dell™ Vostro™ 1220 Service Manual
Removing the Media Bay Device
1. Follow the procedures in Before Working Inside Your Computer .
2. During installation or removal of ANY hardware, always ensure all data is backed up properly.
3. Remove the battery from the computer.
4. Remove the one screw securing the media bay device in place.
5. Slide the media bay device out of the system.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.