Dell Vostro 1220 (Mid 2009) - Manual (Page 38)

Back to Contents Page
LCD Inverter
Dell™ Vostro™ 1220 Service Manual
Removing the LCD Inverter
1. Follow the procedures in Before Working Inside Your Computer .
2. During installation or removal of ANY hardware, always ensure all data is backed up properly.
3. Remove the battery, hinge cover, keyboard, optical drive, LCD assembly, and LCD bezel from the system.
4. Disconnect the cable from the inverter.
5. Disconnect the other cable from the inverter.
6. Peel the LCD inverter away from the LCD assembly.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.