Dell Vostro 1220 (Mid 2009) - Manual (Page 40)

Back to Contents Page
LCD Panel
Dell™ Vostro™ 1220 Service Manual
Removing the LCD Panel
1. Follow the procedures in Before Working Inside Your Computer .
2. During installation or removal of ANY hardware, always ensure all data is backed up properly.
3. Remove the battery, hinge cover, keyboard, optical drive, LCD assembly, and LCD bezel from the system.
4. Disconnect the camera cable from the camera.
5. Disconnect the white and pink cable from the LCD inverter.
6. Remove the six screws securing the LCD panel to the LCD assembly.
7. Flip the LCD panel over.
8. Disconnect the LCD cable from the LCD panel.
9. Lift the LCD panel away from the LCD plastics.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.