Dell XPS 600 User Manual
Page 33
Removing and Installing Parts: Dell XPS 600 Service Manual
parts0.htm[4/10/2014 9:50:52 PM]
6 bracket caught outside of slot
8. Before you lower the retention arm, ensure that:
The tops of all cards and filler brackets are flush with the alignment bar.
The notch in the top of the card or filler bracket fits around the alignment guide.
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer
cover from closing properly or cause damage to the equipment.
9. Press the retention arm into place, securing the card(s) in the computer.
1 filler bracket
2 alignment guide
3 alignment bar
4 retention arm
NOTICE:
An incorrectly attached graphics power cable may result in degraded graphics performance.
10. Connect the power cable to the power connector on the card.
For information about the card cable connections, see the documentation that came with the card.