Dell XPS 600 User Manual

Page 58

Advertising
background image

Removing and Installing Parts: Dell XPS 600 Service Manual

parts0.htm[4/10/2014 9:50:52 PM]

1. Follow the procedures in "

Before You Begin

."

2. Disconnect the two cooling fan power cables from the FANREAR and FANCPU connectors on the system board (see

"

System Board Components

").

3. Disconnect the power cable from the POWER12V connector on the system board (see "

System Board Components

").

4. Remove the airflow shroud.

1 anchor tabs (3)
2 shroud release levers (2)

CAUTION:

The heat sink can get very hot during normal operation. Be sure that the heat sink has had

sufficient time to cool before you touch it.

5. Remove the heat sink:

a. Remove the retention module clips. Press the tabs toward the center of the clip and lift.

Advertising