Qmark CFWF - Counterflow Electric Wall Furnace - Manual

Electric Counterflow
Wall Furnace
Dear Owner,
Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered
Products. You have made a wise investment selecting the highest quality product in the heating indus-
try. Please carefully read the installation and maintenance directions shown in this manual. You should
enjoy years of efficient heating comfort with this product from Marley Engineered Products... the indus-
try’s leader in design, manufacturing, quality, and service.
... The Employees of
Marley Engineered Products
Installation & Maintenance Instructions
Read Carefully - These instructions are written to help
you prevent difficulties that might arise during installation
of your heaters. Studying the instructions first may save
you considerable time and money later. Observe the fol-
lowing procedures, and cut your installation time to a min-
imum.
TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK:
1. Disconnect all power coming to heater at main service
panel before wiring or servicing.
2. All wiring must be in accordance with the National and
Local Electrical Codes and the heater must be ground-
ed.
3. Verify the power supply voltage coming to heater
matches the ratings printed on the heater nameplate
before energizing.
4. This heater is hot when in use. To avoid burns, do not
let bare skin touch hot surfaces.
5. Do not insert or allow foreign objects to enter any ven-
tilation or exhaust opening as this may cause an elec-
tric shock, fire,or damage to the heater.
6. Do not block air intakes or exhaust in any manner.
Keep combustible materials, such as crates, drapes,
etc., away from heater. Do not install behind doors,
furniture, towels, or boxes.
7. A heater has hot and arcing or sparking parts inside.
Do not use it in areas where gasoline, paint, or flam-
mable liquids are used or stored.
8. Use this heater only as described in this manual. Any
other use not recommended by the manufacturer may
cause fire, electric shock, or injury to persons.
9. This heater is not approved for use in corrosive atmos-
pheres such as marine, green house, or chemical stor-
age areas.
10. Do not install this heater in an alcove.
11. Do not install this heater in a travel trailer or recre-
ational vehicle.
SAVE THESE INSTRUCTIONS
WARNING
!
Model # Voltage Watts Amps BTU/Hr.
CFWF920 240V 9.2kW 38 31,395