Qmark DSH - Decorative Sill-Height Convectors User Manual

Csh and dsh, Save these instructions, Installation, operation & maintenance instructions

Advertising
background image

Decorative Sill Height Convection Heaters
(Type DSH)

WARNING

SAVE THESE INSTRUCTIONS

WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAU-
TIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE
THE RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO
PERSONS, INCLUDING THE FOLLOWING:

1. Read all instructions before installing or using the heater.

2. A heater has hot and arcing or sparking parts inside. Do not

use in areas where gasoline or flammable liquids are used
or stored. Do not use in corrosive environment or any area
where explosive materials are used or stored.

3. This heater is hot when in use. To avoid burns, do not let

bare skin touch hot surfaces. Keep combustible materials,
such as furniture, pillows, bedding, papers, clothes, and cur-
tains away from heater.

4. To prevent a possible fire, do not block air intakes or

exhaust in any manner.

5. Do not insert or allow foreign objects to enter any ventilation

or exhaust opening as this may cause an electric shock or
fire, or damage the heater.

6. Serious injury or death could result from electric shock.

Make sure electrical power supply circuit coming to heater
is disconnected at main disconnect or service panel before
installing or servicing this heater.

7. This heater is not for residential or household use.

CSH and DSH

Convectors

Installation, Operation & Maintenance Instructions

Commercial Sill Height Convection Heaters
(Type CSH)

!

GENERAL

This heater is designed to provide years of efficient, trouble free operation as a primary or supplementary heat source for comfort
heating in residential and commercial applications. CSH and DSH convector heaters must be thermostatically controlled for efficient,
safe operation. A thermostat is not provided with this heater. However, a single or double pole thermostat accessory is available
for installation into this heater at your place of purchase, or the heater may be connected to any suitable wall mounted thermostat
that will meet the electrical load requirements. Installation or use of this product in any manner not described herein will void the
warranty and could result in injury, damage to property, or permanent damage to heater.

IMPORTANT INSTRUCTIONS

RECEIVING

Material when shipped was in good order and Marley
Engineered Products holds clear bill of lading, therefore any
concealed damage must be reported at once to the carrier for
inspection and settlement.

Note: It is advisable to store cartons in a central area to be
drawn upon as needed per room requirements. If called for on
order, the cartons will have been tagged with proper room
number.

Advertising
This manual is related to the following products: