If your vcr or tv is a monaural type, Connections for playback – Sony CCD-TR930 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections for playback
You can use this camcorder as a VCR by connecting it to your TV for playback. There
are some ways to connect the camcorder to your TV. When monitoring the playback
picture by connecting the camcorder to your TV, we recommend you to use house
current for the power source.
Open the jack cover. If your TV is already connected to a VCR, cormect the camcorder to
the LINE IN inputs on the VCR by using the supplied A/V connecting cable. Set the
input selector on the VCR to LINE. Set the TV/VCR selector on the TV to VCR.
If your VCR or TV has an S video jack, connect using the S video cable (not supplied)
[a]
to obtain a high quality picture.
Vi
if
.5^ J.fe'
S VIDEO OUT
[a]
VIDEO OUT
\
[b]
AUDIO OUT
(not supplied)
: Signal flow
If you are going to connect the camcorder using the S video cable (not supplied)
[a],
you do not need to connect the yellow (video) plug of the A/V cormecting cable
[b].
If your VCR or TV is a monaural type
Connect only the white plug for audio on both the camcorder and the VCR or the TV.
With this connection, the sound is monaural even in stereo mode.
To connect to a VCR or TV without Video/Audio input jacks
Use the RFU-95UC RFU adaptor (not supplied).
18