Sony CCD-TR930 - Manual (Page 57)

Symptom Cause and/or Corrective Action
Recording stops in a few
seconds. The START/STOP MODE switch is set to 5 SEC or ANTI
GROUND SHOOTING 1 .
Set it to ji . (p. 15)
The cassette cannot be
removed from the holder. • The battery is dead.
Use a charged battery pack or the AC power adaptor,
(p. 6, 22)
SI and ^ indicators flash and
no function except for cassette
ejection works. • Moisture condensation has occurred.
■> Remove the cassette and leave the camcorder for at least
1 hour. (p. 52)
The counter, date or time
indicator is flashing. • You pressed DATE and TIME together for more than 2
seconds.
■> The camcorder is not malfunctioning. You may start
recording. Flashing will stop soon.
• The lithium battery is weak or dead.
■¥ Replace the lithium battery with a new one. (p. 46)
The tape does not move when
a video control button is
pressed. • The POWER switch is set to CAMERA or OFF.
■* Set it to VTR.
• The tape has run out.
Rewind the tape or use a new one. (p. 20)
The SteadyShot function does
not activate. • STEADY SHOT is set to OFF.
-» Set STEADY SHOT to ON. (p. 45)
• The SteadyShot function does not work when the wide
mode is set to 16:9 FULL.
The autofocusing function
does not work. • FOCUS is set to MANUAL.
■> Set it to AUTO. (p. 31)
• Shooting conditions are not suitable for autofocus.
Set FOCUS to MANUAL to focus manually, (p. 31)
The fader function does not
activate. • START/STOP MODE is set to 5 SEC or ANTI GROUND
SHOOTING ¿. .
■> Set it to . (p. 15)
• A title is displayed.
■> Stop superimposing the title.
No sound or only a low
sound is heard when playing
back a tape.
• The stereo tape is played back with HiFi SOUND set to 1
or 2 in the menu system.
, Set.to STEREO in the menu system, (p. 26)
Excessive high-pitched sound
is heard. • The picture has been recorded with WIND set to ON in the
menu system.
-> When there is no wind, set it to OFF. (p. 25)
The date or time indicator
disappears. • Reset the date and time. (p. 47)
>
CL a
(to be continued)
57