Sony CCD-TR930 - Manual (Page 40)

Making your own titles
You can make up to two titles and store them in the camcorder. Eject the cassette before
you begin. Your title can have up to 22 letters.
( 1 ) While the camcorder is in Standby mode, press MENU to display the menu.
(2) Turn the control dial to select TITLEl SET or TrTLE2 SET, then press the dial.
(3) Turn the control dial to select the desired character, then press the dial.
To move the cursor to the character on the left side, select
(4) Repeat step 3 until you finish the title.
(5) When you are finished, turn the control dial to select <-i, then press the dial.
( 6 ) Press MENU to erase the menu display.
MENU
t
ORC TO SET
REG MODE
TITLE COL
TITLE POS
TITLE LANG
[TITLEl SET > >
TITLE2 SET
4-
[MENU]: END
TITLEl SET .
TITLEl SET [liE_____________
MENU
•f
TITLEl SET NEW YORKF] >
*■
A
4-
IMENUl' END
To edit the title you have stored
In step 2, select TITLE 1 SET or TITLE 2 SET, whichever title you want to edit is stored
in. Then change the title.
If you do nothing more than 5 minutes while a cassette is in the camcorder
The power goes off automatically. Turn STANDBY down once, turn it again up and
proceed from step 1.
When you enter 22 letters in step 4
The title is stored automatically. (You do not need to got to step 5.)
To delete a title
At the leftmost character position, select <-> and press the control dial. Do not erase the
title by selecting empty spaces. If you do so, a title full of empty spaces is stored.
40