Starting editing, To edit more scenes, To stop editing – Sony CCD-TR930 User Manual
Page 43: Note on the display function, Note on fine synchro edit, Editing onto another tape
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing onto another tape
You can create your own video program by editing with any other @ 8 mm, Hi0 Hi8,
№ VHS, SHE S-VHS, ima VHSC, SSK3 S-VHSC, to Betamax or EsISl ED Betamax
VCR that has video/audio inputs.
Connect the camcorder to the VCR using the supplied A/V connecting cable.
Set the input selector on the VCR to LINE, if available.
(
1
)
While pressing the small green button on the POWER switch, slide it to VTR.
(2) Set EDIT to ON in the menu system.
>
a.
<
O
■o
iSignal flow
starting editing
(
1
)
Insert a blank tape (or a tape you want to record over) into the VCR, and insert
your recorded tape into the camcorder.
(2) Play back the recorded tape on the camcorder until you locate the point where
you want to start editing, then press II to set the camcorder in playback pause
mode.
(3) On the VCR, locate the recording start point and set the VCR in recording
pause mode.
(4) Press II on the camcorder and VCR simultaneously to start editing.
To edit more scenes
Repeat steps 2 to 4.
To stop editing
Press □ on both the camcorder and the VCR.
Note on the DISPLAY function
If you have displayed the viewfinder screen indicators on the TV, erase the indicators
by pressing DISPLAY on the Remote Commander so that they will not be
superimposed on the edited tape.
Note on Fine Synchro Edit
If you connect a video deck that has the Fine Synchro Edit feature to the LANC
C
jack
of the camcorder, using a LANC cable (not supplied), the edit will be even more
precise.
43