Sony IT-M202 - Manual (Page 16)

Receiving calls
( FLASH )
(L ine i ) ( line 2) ( speakerphone )
When you hear the phone ring;
• Pick up the handset from the
phone (or press
(SPEAKERPHONE)).
or
• Press ( LINE 1 ) or ( LINE 2)
whichever button is flashing.
The SPEAKERPHONE lamp
lights up and you can talk
through the speakerphone.
To talk through the handset,
pick up it from the cradle.
The connected LINE 1 or LINE 2
button lights up.
When you're done talking,
replace the handset in the cradle
(or press
(SPEAKERPHONE)).
The LINE 1 or LINE 2 button
goes off.
When calls come in on line 1 and
line 2 at the same time
When you pick up the handset from
the phone or press
(SPEAKERPHONE), line 1 is
connected and the LINE 2 button
flashes.
To put a call on hold or disconnect
the line, see "Receiving a call while
talking" on page 17.
Tip
The ringer tone on line 1 is lower aria line 2 is higher.
Basics