Sony IT-M202 - Manual (Page 19)

Note
Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tip
If you have entered a number incorrectly in step 4, press (PROGRAM), then start
from the begining.
To store a number to be dialed vib Private Branch Exchange
(PBX)
Before entering a phone number in Step 4, do as follows:
1 Enter the outside line access digit (e.g., 9).
2 Press ( REDIAL7PAUSE).
To change a stored number
Store a new number, as described previously.
Making calls with one-touch dialing
1 Pick up the handset, or press ( speakerphone ).
When you want to select the phone number stored in the
second memory of the one-touch dial button, press
( LOWER).
2 Press the desired one-touch dial button.
The phone number stored in the one-touch dial button will
be dialed.
>
a
<
fii
3
n
«
a
T1
(D
01
(0
VI
Note
When there is no phone number stored to a one-touch dial button, you hear five
short error beeps.
Advanced Features 19'