Sony IT-M202 - Manual (Page 17)

Additional tasks
To Do this
Put a call on hold Press CHOLOyThe LINE 1 or LINE 2 button will
flash slowly.
Press
( LINE 1) or (LINE 2') to resume the
conversation.
Switch to another call on
("call waiting" service*) Press (FLASH).
Press (FLASH) again to return to the first caller.
* Contact your telephone company to subscribe to this service.
Note
When another extension connected to LINE 1 or LINE 2 is in use, the LINE 1 or
LINE 2 button flashes.
Receiving a call while talking
If another call comes in while talking on the other line, the
corresponding line button will flash.
Example; Receiving a call on line 2 while talking on line 1
1 Press (HOLD).
Line 1 is put on hold and the LINE 1 button flashes slowly.
2 Press (LINE 2).
Now you can talk to the other caller bn line 2.
To put line 2 on hold and resume the conversation on line 1, press
(HOLD), and then (LINE 1).
To disconnect line 2 and resume the conversation on line 1, press
(LINE 1).
§
lA
c
Note
If you do not press (HOLD ) in step 1, line I will be disconnected.
To talk with two parties at the same time using both line 1 and line 2,
"Having a conference call" on page 20.
Basics 1?^''