Playing in a desired order-program piay, To stop playing, To cancel program play – Sony CDP-997 User Manual
Page 20: To check your program, To change your program, To erase the last selection, press clear, Playing in a desired order-program play, Playing in a desired order, Program piay
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing in a Desired Order
-Program piay
Program play allows you to play up to 24 programmed selections in the order in
which they are programmed. This section shows the basic method of programming
selections. For the method of programming selections to be recorded on your
tape, see page 24.
To stop playing
Press ■.
You can play the same program repeatedly as long as you
do not cancel program play or erase the program.
To cancel program play
Press CONTINUE and return to the continuous playing
mode.
The program will be erased.
To check your program
Press CHECK and the first selection in the program will be
displayed.
Each time you press CHECK, the next selection in the
program will be displayed. When CHECK is pressed after
the last selection, END appears and then the display
returns to the initial display.
To Change Your Program
To erase the last selection, press CLEAR.
Each time you press CLEAR, the last selection in the
program will be erased.
To add a selection to the end of the program, just
press the numeric button for that selection. You can also
add selections during play or stop.
To delete a selection, press CHECK repeatedly until the
undesired selection is displayed. Then press CLEAR.
To change the order, press ■ during stop to erase the
program. Then repeat the programming procedure from the
beginning.
20