Timer activated playing, Connection and operation, To the switched outlet – Sony CDP-997 User Manual
Page 41: Audio timer, Set a desired play mode, Set the timer to a desired play start time, Set timer to play position, Keep the power switch depressed on the player, When the timer-activated play ends, To play in the program play mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Timer Activated Playing
By connecting a commercially available timer, disc play of the desired play mode
can be started at any desired time.
Connection and Operation
jQaa
Connecting
AC power cord
To the switched outlet
_Z_
Amplifier
Connecting
AC power cord
(Keep the power on)
Audio timer
1,4
-to an w all outlet
Connect the timer to the piayer and power
on the timer.
Power on the player and insert a disc in the
player.
Set a desired play mode.
(e.g. continuous play, program play, shuffle play,
repeat play, etc.)
Set the timer to a desired play start time.
Set TIMER to PLAY position.
TIMER
OFF PLAY
JU
Play will start at the registered time.
Keep the POWER switch depressed on the player
When the timer is set, the power of the piayer wili be cut
off.
However, be sure to leave the POWER switch on.
When the timer-activated play ends
Be sure to set TIMER to OFF. If the TIMER switch is left
at PLAY, the player wili automatically start playing the next
time the power is turned on.
To play in the program play mode
Make a program bank (page 36) and then prepare for timer
activated playing.
If you select the custom index play mode
Play begins from custom index 1.
41