Operating from an outside phone, Notes, Setting the remote id code (security code) – Sony SPP-A967 User Manual

Page 18: To change the remote id code (security code)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Recording a memo

You can record a "memo" (up to four minutes) as a personal reminder
or as a message for other people. You can play back the recorded
memo like any incoming messages (see page 32).

Operating from an outside phone

You can call from a touch-tone phime and pick up new messages
recorded on the phone. First, you jusl set lire jemoie it) code (seci
code) and turn on the answering function before going out.

1

Press ( MEMO~),

You hear a voice guide.

2

Select a mailbox by paressing

CMAILBOX 1 ), ( MAILBOX 2) or

C

mailbox

3). You will hear a

voice guide, then a long
confirmation beep.

3

After the tone, start recording.

Speak about 12 inches (30 cm)
away from the microphone.

Press (MEMO) to stop) recording.

The message number in the
dispalay increases by one.

Notes

• If you press (MEMO) when the memeirv is full ("F" flashing on the displac),

\'OLi hear h\ e short error beeps and \ ou cannot record a memo.

• It a call comes in or (JAL^ is pressed wlhle recording a memo, rectirding is

canceled. Start over the procedure.

• It the remaining memor\' becomes full while recording, rect'rding stops

autkMnaticalK' and "F" flashes on the d\spla\'.

Tip

If four minutes ha\ e passed in h>tep 3, recording stop.^ autt.>maticall\-, and the
recorded memo is counted as a new message.

Setting the remote ID code (security code)

1

2

Press rsET/REC).

—3

Press (ANSWER ON/OFF).

You hear a voice guide:

"Please set the security code. To
select, press the SKIP or
REPEAT button. To enter, press
the SET button."

Set a two-digit number between
00 and 99 by pressing (

skip

/

QUICK) or (REPEAT/SLOW).

Press (SKIP/QUICK) to increase a
number, or

(

repeat

/

slow

) to

decrease.

Each time you press (SKIP/
QUICK) or (REPEAT/SLQW), the

p>hone announces a number.

Press (SET/REC).

The remote ID code (security

code) is set, and you hear a long
confirmation beep.

To change the remote ID code (security code)

Enter a new remote ID code (security code). The neu code will replace
the old one.

continued

34"'

Answering Machine Features

Answering Machine Features

Advertising