To change the home area code, F pgm) – Sony SPP-A973 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Notes

• If the home area code is already entered, it appears on the display in step 4.

To enter a different home area code, see "To change the home area code"
below.

• Do not allow more than 20 seconds to elapse between each step of the

procedure.

Tips

• You may press Jog Dial instead of

in step 6.

• To check the current home area code, perform steps 1 to 4. The home area

code appears on the display for about 20 seconds.

To change the home area code

1

Perform steps 1 to 4 on page 14.

The current home area code appears on the display.

2

Turn Jog Dial down to erase the current home area code.

3

Enter a new home area code using the dialing keys.

4

Press

f PGM).

You will hear a long confirmation beep.

1C

U

a

n

D

To enter the local area code (For 10 digits

phone numbers users)

If a call matches one of the local a'rea codes you entered, the phone
number will be registered with 10 digits in the Caller ID list (area code
+ number). If a call does not match one of the local area codes you

entered, the phone number will be registered with 11 digits in the
Caller ID list (1 + area code + number). Some regions of the country
allow you to have more than one local area code. (Up to five local area
codes can be entered in this phone.)

1

Perform steps 1 to 3 on page 14.

2

Turn Jog Dial up to make "LOCAL" flash.

' / ( I I I “

3

Press Jog Dial.

4

Select the number ("Itl" to "US") to enter the

local area code by turning Jog Dial.

=|j=«2 83 #4 «5

continued

Getting Started I 15*^

Advertising