Sony SPP-A973 User Manual

Page 55

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Symptom

Remedy

P

«

c

X

I

m

C

<

You hear five short error beeps
and cannot store a number in
the Phcme Directory.

Make sure you follow the procedure for storing the
number correctly (pages 24).
Make sure the number (including the tone and pause

digits) does not exceed 32 digits.

Phone Directory dialing is
incorrect.

• Store the correct number (pages 24).

Message is not recorded.

The remaining recording time is less than 30 seconds
or 99 messages were recorded. The answering

machine becomes "Memory full" status and does not
record messages. Erase messages (page 37).

The message is less than two seconds. The answering

machine does not record messages less than two
seconds in length.

No sound from the speaker of
the base unit.

Adjust the speaker volume (page 37).

The caller's message is

interrupted.

The callCT's message is too long.
The caller's voice is too low. The unit disconnects the

line when it detects seven seconds of silence.

The clock is incorrect.

• There was a power inten uption. Reset the time

(page 30).

E g

il

'*■ a

•£ s

The phone does not acc^t your
remote ID code (security code).

Make sure you call from a touch-tone phone.
Make sure the remote ID code (security code) is

correct.
Make sure you entered the remote ID code (security

code) within two seconds after you've entered (®.

2 ^ The line is disconnected when

a

® you call your phone from a

® touch-tone phone.

You entered wrong remote ID codes (security codes)
three times.

The caller's name and/or
phone number does not appear
on the display.

Make sure you have subscribed to Caller ID service.
Caller ID service may not work when the phone is
connected to a Private Branch Exchange

(PBX).

The call is made through company which does not
offer Caller ID service. "OUT OF AREA" will appear
on the display.
The call was "blocked". "PRIVATE" will appear on

the display.
You have answered the call while "** RINGING **"

was displayed. Be sure to answer after the Caller (D
data is displayed.

>

a

a

o’

3

fi»

3

o

3

Dl

r*

5‘

3

continued

Additional Information

155“

Advertising