Management options, Using the device manager – Cisco 3030 User Manual

Page 26

background image


Cisco Catalyst Blade Switch 3030 Hardware Installation Guide


Chapter 1 Product Overview

Management Options

Management Options

This section describes management options for the switch module:

Using the Device Manager, page 1-6

Using the Command-Line Interface, page 1-7

Using SNMP, page 1-7

Using the Device Manager

The simplest way to manage the switch is by using the device manager that is in the switch memory. This
is an easy-to-use web interface that offers quick configuration and monitoring. You can access the device
manager through a web browser from anywhere in your network.

The device manager dashboard is shown in

Figure 1-3


Figure 1-3

Device Manager Dashboard

Follow these steps to access the device manager:


Launch a web browser on your PC or workstation.


Enter the switch IP address in the web browser, and press Enter. The device manager page appears.


Use the device manager to perform basic switch configuration and monitoring. Refer to the device
manager online help for more information.