Sony LBT-LX50 - Manual (Page 12)

Playing a CD (continued)
To Do this
Stop playback Press ■.
Pause Press C>M (or II on the remote).
Press on again to resume
playback (or CD ► on the
remote).
Select a track During playback or pause, turn
the jog dial clockwise (to go
forward) or counterclockwise (to
go backward) and release it when
you reach the desired track.
Or press AMS* (to go
forward) or AMS (to go
backward) on the remote.
Find a point
in a track Press and hold ►► or ◄◄ during
playback, and release at the
desired point.
Select a CD Press one of the DISC 1 - DISC 5
buttons (or DISC SKIP).
Play only the
CD you have
selected Press PLAY MODE repeatedly
until "1 DISC" appears.
Play all CDs Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Remove or
change the
CDs Press PUSH OPEN.
Adjust the
volume Turn VOLUME (or press
VOL +/- on the remote).
• AMS: Automatic Music Sensor
Tips
• Pressing Oil while the system power is off
automatically turns on the system and starts CD
playback if there is a CD on the tray (One Touch
Play).
One Touch Play is not available in Power Saving
mode.
• You can switch from another source and begin
playing a CD just by pressing Oil, one of the
DISC 1 - DISC 5 buttons, or CD ► on the remote
(Automatic Source Selection).
• If there is no CD in the player, "NO DISC"
appears in the display.
• You can change the CD which is in the loading
position during playback of the CD which is in the
playing position.
Recording a CD
—
CD Synchro Recording
This function lets you easily record from a
CD to a tape. You can use TYPE I (normal) or
TYPE II (Cr02) tapes. The recording level is
automatically adjusted.
l/(!)
(Power) SURROUND
DOLBY NR
2,37 ■ 4 5
1 Press ^ B EJECT and insert a
recordable tape into deck B.
With the side you want to
record on facing forward
2
Press PUSH OPEN and place a CD.
With the label
side up.
When you play
a CD single,
place it on the
inner circle of
the tray.
12