Specifications, For the u.s. model, Audio power specifications – Sony LBT-LX50 User Manual
Page 49: Amplifier section
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, both channels driven, from
120 -10,000 Hz; rated 140 watts per channel
minimum RMS power, with no more than
10% total harmonic distortion.
Amplifier section
(LBT-LX50 (Canadian model only))
Continuous RMS power output (Reference)
160 + 160 watts
(6 ohms at 1 kHz, 10 %
THD)
Total harmonics distortion
Less than 0.07 %
(6 ohms at 1 kHz, 70 w)
(LBT-LX8)
The following measured at AC 120/220/240 V,
50 Hz
DIN power output (Rated)
240 + 240 watts
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
300 + 300 watts
(4 ohms at 1 kHz, 10 %
THD)
(LBT-LX6)
The following measured at AC 120/220/240 V,
50 Hz
DIN power output (Rated)
150 + 150 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
200 + 200 watts
(6 ohms at 1 kHz, 10 %
THD)
(LBT-LX7)
DIN power output (Rated)
200 + 200 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
250 + 250 watts
(6 ohms at 1 kHz, 10 %
THD)
Music power output (Reference)
430 + 430 watts
(6 ohms at IkHz, 10 %
THD)
(LBT-LX5)
DIN power output (Rated)
110 +110 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
140 + 140 watts
(6 ohms at IkHz, 10 %
THD)
Music power output (Reference)
240 + 240 watts
(6 ohms at 1 kHz, 10 %
THD)
Inputs
DJ MIX IN *(phono jacks):
GUITAR IN (phone jack):
PHONO IN (phono jacks):
MIX MIC (phono jack):
VIDEO 1 IN (phono jacks)
VIDEO 2 IN (phono jacks)
MD IN (phono jacks):
sensitivity 250 mV,
impedance 47 kilohms
sensitivity 75 mV,
impedance 470 kilohms
sensitivity 3 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
:sensitivity 250 mV,
impedance 47 kilohms
sensitivity 250 mV,
impedance 47 kilohms
sensitivity 450 mV,
impedance 47 kilohms
Outputs
DJ MIX OUT »(phono jacks):
sensitivity 250 mV,
impedance 1 kilohms
PHONES (stereo phone jack):
accepts headphones of 8
ohms or more
VIDEO OUT (phono jack): voltage 250 mV,
impedance 1 kilohm
MD OUT (phono jacks): voltage 250 mV,
impedance 1 kilohm
FRONT SPEAKER:
(LBT-LX8)
accepts impedance of 4 to
16 ohms
(LBT-LX7/LX6/LX5/LX50/LX30)
accepts impedance of 6 to
16 ohms
SURROUND SPEAKER (LBT-LX50 only ):
accepts impedance of 16
ohms
* European, North American, and Mexican
models only.
continued
49