Cd player section, Tape player section, Tuner section – Sony LBT-LX50 User Manual

Page 50: Speakers, Ss-lx50 for lbt-lx50/lx30, Ss-lx8g*or lx8 for lbt-lx8, Ss-lx7 for lbt-lx7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Specifications (continued)

CD player section

System

Laser

Laser output

Wavelength
Frequency Response
Signal-to-noise ratio
Dynamic range
CD DIGITAL OUT
(square optical connector

Wave length;
Output level:

Compact disc and digital
audio system
Semiconductor laser

(k

= 780 nm). Emission

duration: continuous
Max. 44.6 pW*
* This output is the value

measured at a

distance of

200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
780 - 790 nm
2 Hz - 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB

jack, rear panel)

660 nm
-18 dBm

Tape player section

Recording system

4-track 2-channel stereo

Frequency Response (DOLBY NR OFF)

40 - 13,000 Hz (±3 dB),
using a Sony TYPE 1
cassette
40 -14,000 Hz (±3 dB),

using a Sony TYPE II
cassette
±0.15 % W.Peak (lEC)
0.1 % W.RMS (NAB)
±0.2 % W.Peak (DIN)

Wow and flutter

Tuner section

FM Stereo, FM/AM superheterodyne tuner

FM tuner section

Timing range
North American models:

Other models;

Antenna
Antenna terminals
Intermediate frequency

87.5 -108.0 MHz (100
kHz step)
87.5 - 108.0 MHz (50kHz
step)
FM Wire antenna
75 ohm unbalanced
10.7 MHz

AM tuner section

Tuning range
Pan-American models:

European and Middle
Eastern models:

Other models:

Antenna

Intermediate frequency

530 -1,710 kHz (with the
tuning interval set at 10
kHz)
531 - 1,710 kHz (with the
tuning interval set at 9

kHz)

531 - 1,602 kHz(with the
tuning interv'al set at 9
kHz)
531 -1,602 kHz (with the

tuning interval set at 9
kHz)
530 -1,710 kHz (with the
tuning interval set at 10
kHz)
AM loop antenna.

External antenna
terminals
450 kHz

Speakers

SS-LX50 for LBT-LX50/LX30

3-way BUILT IN SW

Speaker System
Speaker units

Woofer;

Tweeter;

Rated impedance:

Dimensions(w/h/d)

Mass

17 cm dia., cone type

2.5 cm dia., horn type

6 ohms

Approx.

255 X 530 x 325

mm
Approx. 10 kg net per
speaker

SS-LX8G*or LX8 for LBT-LX8

Speaker System

Speaker units
Super Woofer:
Tweeter;
Rated impedance:
Dimensions(w/h/d)

Mass

3-way BUILT IN SW,
Magnetically shielded
type

20 cm dia., cone type
2.5 cm dia., horn type
4 ohms
Approx. 290

X

615

X

435

mm
Approx. 16 kg net per
speaker

For LBT-LX8 (Middle Eastern, Australian, and

New Zealand models) only.

SS-LX7 for LBT-LX7

Speaker System

Speaker units
Super Woofer;
Tweeter:
Rated impedance;
Dimensions(w/h/d)

Mass

50

3-way BUILT IN SW,
Magnetically shielded
type

20 cm dia., cone type
2.5 cm dia., horn type
6 ohms
Approx. 290

X

615

X

435

mm
Approx. 16 kg net per

speaker

Advertising