Sony CDP-391 - Manual (Page 14)

Tips on Editing Tapes
The following functions are convenient for editing your own
tapes.
Fading in/Fading out
You can have the play fade in or fade out from 2 to 10
seconds.
To designate the fading duration
1. Press FADER during the stop mode.
2. Designate the fading duration within the range of 2 to 10
seconds by pressing (or ◄◄/►►/
No designation makes the fading duration 5 seconds long.
To end the play fading out
Press FADER when you want to start fading out.
“N»»'” flashes in the window, and play fades out for the
designated duration and enters the pause mode.
To restart the play fading in
Press FADER.
-■H” flashes in the window, and play fades in for the
designated duration.
Fading Out at the Desired Time - Time Fade
You can have the play fade out at the end by designating the
play duration. Once the time fade is set, it functions twice for
editing both sides of a tape. You can change discs without
cancelling this function and enjoy it in any play mode.
1 Press EDIT/TIME FADE twice during the stop mode.
“TIME FADE” is displayed in the window.
2 Set the desired play duration, using the TIME SET button.
TIME SET button - Useful when using commercial tapes
(46-, 54-, 60-, 74- and 90-minute tapes).
Each time you press TIME SET, the play duration for one
side of the tape is displayed as follows.
23.00 ->■ 27.00 ^ 30.00 ^ 37.00 ^ 45.00 -----------
c
To adjust the second
Each time you press ►►I (or
the set time changes by 10 second intervals.
3 To start play, press ►! I (or ►).
Before the unit enters the pause mode at the set time (the
tape indicator changes to B), play starts to fade out from
2 to 10 seconds according to the fading duration you
have designated.
To start play for the other side of the tape
Press ►!! (► or II), or FADER. (Pressing FADER starts the
play fading in.)
When this play ends, time fade is cancelled.
If you want to start the play fading in
1 Press ►II twice (or II once) during the stop mode.
The unit enters the pause mode.
2 Press EDIT/TIME FADE once.
“TIME FADE” is displayed.
3 Set the desired play duration, following the step 2 above.
4 To start play, press FADER.
Play will start fading in and end at the set time fading out.
To cancel time fade
- Press EDIT/TIME FADE again.
- Press FADER during play.
- Press PEAK SEARCH during the stop mode.
- Do manual search during play.
To display the time remaining until the time set
Press TIME twice. In the shuffle play mode, however, the time
remaining until the fade-out time is not displayed.
14