Sony CDP-391 - Manual (Page 8)

Locating a Particular Selection Locating a Particular Point in a Selection
You can locate the beginning of a desired selection. You can locate a particular point in the disc during play.
To locate sequentially
To locate the beginning of the current or preceding
selection
• Press ◄◄ (or !◄◄) as many times as required.
• Keep Mil ◄◄ (or !◄◄) pressed to skip selections.
(Operable during the stop mode only, when using the
button on the player.)
To locate the beginning of a succeeding selection
. Press ►► (or ►►!) as many times as required.
• Keep ►► (or ►►!) pressed to skip selections.
(Operable during the stop mode only, when using the
button on the player.)
To search quickly while monitoring the sound______
To go ahead at high speed
Keep ►► (or ►►) pressed during play and release at
the desired point.
To go back at high speed
Keep ◄◄ (or ◄◄) pressed during play and release at
the desired point.
To search quickly by observing the display________
Press Ml (or II). then keep ►> ►>!, (or
◄◄) pressed. The search speed will increase, but there will
be no sound. Find the desired point by observing the display.
Press Ml(^ or II) again at the desired point.
To locate directly
Press one of the numeric buttons Q] to 1101 on the remote
commander to enter the desired selection number.
If a selection number is greater than 10, use the I >10| and
|T| to 1101 buttons. 1101 functions as the figure 0.
e.g. To play from seleotion No.22
Press [>ÏÔ1i^i^
To play from selection No.30
Press r>ïÔlf3irïÔl
When you press (or during play
The player locates the begining of the selection.
When -n is displayed
If you continuously press ►► (or ►►) at the end of the disc,
"■n " appears in the window. Press ◄◄ (or !◄◄, to return
to normal indication.
If you continuously press K4 ◄◄ (or ◄◄) at the beginning of the
disc, play begins automatically from the first selection.
Information Display
□
TIME
B
TIME
B
T >■ "E 3 4 5
J 0, IB 6 7 fl a 10
► (Zl J -“’o'
3 * t
r
« t
»5
— K-—
- 3 l l i
► n
TIME
Each time you press TIME during play, the display changes
to give you the following information.
□
□
B
Elapsed playing time
Remaining time in a selection
If the current selection number is over 20,'
displayed.
Remaining time of the disc
(not displayed during shuffle play)
if you press TIME during stop
The total time and total number of selections will be displayed.
If a program is stored, the total number of programmed selections
will be displayed.
IS
8