Sony SLV-998HF - Manual (Page 13)

O
Select your cable box
output channel and
press OK.
CABLE BOX CONTROL
SET UP is done
CABLE MOUSE jS»v K)FF 1
BOX CODE NO. Is^il
HSWKWiiiHiiidSli^^ViHd li
Use [♦♦I to select CABLE
BOX CH. Then push ^
Normal display
Hookup 1: VCR Plus+ channel setup
1
Press MENU and select SET VCR Plus+
CHANNELS.
2
Press CURSOR to select AUTO and
press OK.
3
Press POWER to turn off the VCR.
TIMER SET/CHECK
TUNER PRESET
CLOCK SET
LANGUAGE
s e ^ VCR Plus-b CHANNELS
CABLE BOX CONTROL
ADVANCED OPTIONS
Use 14^ lo select an
i tern, then push jOK}
Use 1»^ to select
Then push [0K|
Push iMENUl to quit
The VCR receives the program information signal from 0:00 am to 5:00 am
while the VCR is turned off, and set up the channel for VCR Plus+ recording.
After channel setup is finished, you can record TV programs using VCR
Plus+. For details, see page 49.
Notes
• To use auto VCR Plus+ channel setup feature, leave the cable box on.
• It takes about 1 hour to complete channel setup.
• The VCR can receive the program information signal only while the VCR is turned
off and no timer recordings are set.
• If the channels in your area don't carry the program information signals, set the
program guide channels manually. For details, see page 51.
• If the Choose your Cable CH MAP menu appears the first time you turn on the
VCR after finishing channel setup, select the MAP number. For details, see page 50.
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see page
37.
Note
• To use the automatic clock setting feature, leave the cable box on.
continued
Getting Started 13