Sony SLV-998HF - Manual (Page 5)

step 2
Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries by
matching the + and - on the batteries
to the diagrain inside the battery
compartment.
Insert the negative (-) end first, then
push in and down until the positive (+)
end clicks into position.
Using the remote commander
You can use this remote
commander to operate this VCR
and a Sony TV or AV receiver.
Buttons on the remote
commander marked with a dot
(•) can be used to operate your
Sony TV.
The RECEIVER VOL +/ - and
MUTING buttons can be used to
operate your Sony AV receiver.
Remote sensor
□
1 I q ]
m
:
II 1 1
© QD
CD'CD ■ © ■ © ■ ©
IS) CS) ■ © ■ © ■ ©
CD CD ■ © ■ © ©
OQ Q © Q
TV RECEIVER
/ VIDEO
-RECEIVER
VOL +/-
MUTING
To operate Set |TV||RECEIVER|/|VIDEO| to
the VCR 1 VIDEOl and point at the remote sensor on the VCR
a Sony TV or
AV receiver
¡TVIIRECEIVER] and point at the remote sensor on the TV or
AV receiver . ~
Notes
• With normal use, the batteries should last about three to six months.
If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
Do not use a new battery with an old one.
Do not use different types of batteries.
Some Sony AV receivers may not be operated with the remote continued
commander.
Getting Started