Hookup 3, Antenna hookup, Q use this hookup if you're using – Sony SLV-998HF User Manual
Page 17: Rear of tv, Vhf/uhf ■ - a, Continued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hookup 3
Pages 17 to 19
Antenna hookup
^
Make the following connections if you're using an antenna (if you don't
have cable TV).
Q Use this hookup if you're using;
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UFIF antennas
Rear of TV
VHF/UHF
■ - A
VHF
Match the type of
connector on your
TV; A, B, or C.
UHF
VHF
UHF
ID
Use this hookup if you're using a VHF-only antenna (you get
channels
2-13
only)
Rear
of
TV
<3Damij^ - - -
or
or
VHF/UHF
- -
^
VHF
• -
Q
UHF
VHF
UHF
Match the type of
connector on your
TV; A, B, or C.
For connector types
B and C, no UHF
connection is
required.
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN_
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied). For details, see page 88.
continued
Getting Started
17