Sony SLV-998HF - Manual (Page 65)

Oaily/weekly recording
In step 2 above, press CURSOR ♦ to select the recording pattern. Each time
you press CURSOR the indication changes as shown below. Press
CURSOR ♦ to change the indication in reverse order.
the current date
-► EVERY MON -
the current date ♦ SUN-SAT -► MON-SAT -► MON-FRI — EVERY SAT ....
EVERY SUN —► 1 month later —► (date counts down)
Tips
• To set the channel, you can also use the CH + ! - or number buttons.
• You can set the channel with the shuttle ring during stop. However, you cannot set
the channel with the shuttle ring on the remote commander when:
- you set CABLE MOUSE in the CABLE BOX CONTROL menu to ON.
- you press JOG so that VCR is in jog mode.
• To set the tape speed, you can also use the SP / EP button.
• When you are recording a program in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the EP
mode. Note that some noises will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, set AUTO TAPE SPEED to OFF in the
ADVANCED OPTIONS menu (page 81).
• To lock the VCR after setting the timer, see page 62.
Notes
• If you are using cable box control, you cannot select "LI" or "L2."
• The station ID appears on the TV screen only when you complete Smart Channel
Mapping and the VCR receives the program information signal (see page 49).
os
0>
SS
K
O
■ O',
ta
3
t*
o'
3
VI
Basic Operations 65