Sony SLV-998HF - Manual (Page 81)

Changing menu options
1
Press MENU and select ADVANCED
OPTIONS.
2
Press CURSOR ^/4’ to select the" option to
change, then press CURSOR
to
change the setting.
The ADVANCED OPTIONS menu has 2
pages. To select page 2, press CURSOR ♦
repeatedly until page 2 appears. To select
page 1, press CURSOR ♦ repeatedly until
page 1 appears.
3
Press OK to return to the original screen.
Menu choices
Initial settings are indicated in bold print.
Page 1
Menu option Set this option to
AUTO ANT SEL ON if your TV is connected only to VHF/UHF OUT on the VCR. To
play a tape, set the TV to the VCR channel (channel 3 or 4).
OFF if your TV is connected to both VHF/UHF OUT and LINE OUT
on the VCR. To play a tape, set the TV to the VCR input.
AUTO STEREO ON to receive stereo programs, OFF to reduce noise. The sound
changes to monaural.
AUDIO MIX ON to listen to the sound recorded on hi-fi and normal audio tracks at
the same time. The AUDIO MONITOR button will not function.
OFF to listen to hi-fi and normal audio tracks separately. Select the
sound using the AUDIO MONITOR button.
TUNER AUDIO MAIN to record the main sound on both hi-fi and normal audio tracks.
SAP to record the SAP (Second Audio Program) sound on both hi-fi
and normal audio tracks.
SHARPNESS L (Low) through H (High) to adjust the sharpness of the picture. L to
turn off the sharpness control.
APC ON to switch on the APC (Adaptive Picture Control) function and
improve picture quality, OFF to switch off APC. -. -
DIMMER ON to make the display window dim, OFF to make it brighter.
AUTO TAPE SPEED ON to change the timer recording tape speed automatically to the EP
mode when the remaining tape becomes shorter than the recording
time, OFF to keep^the tape speed.
TAPESELECT AUTO or 180 (when using a T-140 or T-180) to select the tape length
and display the remaining time correctly.
SMART CUE MEDIUM to set the automatic rewinding time on skip playback to a
medium length, SHORT to set to short, LONG to set to long.
Additional Operations 81