Sony SLV-998HF - Manual (Page 67)

Using the shuttle ring
With the shuttle ring, you can operate a variety of playback options. There
are two ways for using the shuttle ring, normal mode and jog mode .
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or
counterclockwise. Each change in the shuttle ring position changes the
playback mode, and the corresponding mark appears on the TV screen for a
few seconds in the following way if the on-screen display function is on:
Playback mode Normal speed
►
Mark on the TV screen
Double speed High speed
[ ► ► ] ______
Slow motion Pause Slow motion
in reverse
High speed
in reverse
[^]
Double speed
in reverse
- X 2
Normal speed
in reverse
- X 1
To use the shuttle ring in jog mode
Usé this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring counterclockwise.
The frame shift speed depends on the speed you turn the shuttle ring.
To resume normal playback, press JOG again. The JOG indicator goes off.
continued
Additional Operations 67