Normal display, Automatic clock setting, Note – Sony SLV-998HF User Manual
Page 26: Step, Hgokups (continued) 0
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step
3: Hgokups (continued)
0
Enter your DSS receiver code number and press
CURSOR For details, see page 40.
CABLE BOX CONTROL
CABLE MOUSE
BOX OUTPUT CH
Enter your CABLE BOX
Code No. using |0-9| keys
Refer to the Operating
Manual for the Code
© Set your DSS receiver
output channel (BOX
OUTPUT CH) to LINE
and press OK.
CABLE BOX CONTROL_______
CABLE MOUSE
lON
BOX CODE NO.
Biel
BOX OUTPUT CH
Use
to
select
CABLE
BOX CH. Then push
SET UP is done
Normal display
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see page
37.
Note
• To successfully record a program from the DSS receiver, proceed as follows;
- Leave the DSS receiver on all the time.
- Turn off the display (menu screen, channel number, etc.) of the DSS receiver.
- To record or receive locked channels, unlock the channel before the VCR starts
recording.
- To set pay-per-view programs in the timer setting, order the pay-per-view
program before the VCR starts recording.
- Some programs are copy protected. You cannot reco'rd these programs.
26 Getting Started