Sony STR-DA333ES User Manual
Fm stereo fm-am receiver
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Hooking Up the Components 4
- Hooking Up and Setting Up the Speaker System 13
- Location of Parts and Basic Operations 22
- Enjoying Surround Sound 26
- Receiving Broadcasts 37
- Other Operations 41
- Additional Information 45
- Inserting batteries into the remote
- Before you get started
- c
- Notes on antenna hookups
- Required cords
- Jacks for connecting audio components
- Note on audio component hookups
- Required cords
- Jacks for connecting video components
- Note on video component hookups
- c
- Required cords
- Example of LD player connected via-en RF demodulator
- Required cords
- Example of a DVD player hookup using the 5.1 INPUT jacks
- Required cords
- c
- other Hookups
- CONTROL A1 11 hookup
- Brief descriptions of buttons and control used to set up the speaker system
- Required cords
- Terminals for connecting the speakers
- Notes on speaker system hookup
- To avoid short-circuiting the speakers
- Speaker impedance
- Specifying the speaker distances
- 1 Press SET UP repeatedly to display "SPEAKER DISTANCE".
- 2 Press the cursor buttons (♦ or ♦) to select the parameter you want to adjust.
- 4 Repeat steps 2 and 3 until you have set all of the parameters that follow.
- 5 Press SET UP to exit the set up mode.
- 1 Press l/(!) to turn on the receiver.
- 2 Press TEST TONE on the supplied remote.
- 4 Press TEST TONE on the remote again to turn off the test tone.
- 9 You can adjust the volume level of all speakers at the same time
- Before turning on the receiver
- Ciearing the receiver's memory
- Tont Panel Parts Description
- I
- E3 DIMMER button
- ini SOUND FIELD ON/OFF button
- EQUALIZER button
- GENRE button
- MODE button
- M MULTI CHANNEL DECODING indicator
- m 5.1 CH INPUT button
- MEMORY button
- FM MODE button
- TUNING +/- buttons
- PRESET TUNING +/- buttons
- SHIFT button
- FM/AM button
- 133 CURSOR MODE button
- When cursor mode is
- Brief descriptions of buttons used to enjoy surround sound
- c
- c
- o
- c
- To get the most from multi channel surround sound
- Adjusting the surround parameters
- 1 Start playing a program source encoded with muiti channei surround sound.
- 2 Press CURSOR MODE repeatediy until the SUR indicator lights up.
- 3 Press the cursor buttons (♦ or *) to select the parameter you want to adjust.
- 4 Press the cursor buttons (« or *) to select setting you desire. The setting is entered automatically.
- Adjusting the equalizer
- 1 Start playing a program source encoded with multi channel surround sound.
- 2 Press CURSOR MODE repeatedly until the EQ indicator lights up.
- 3 Press the cursor buttons (♦ or ♦) to select the parameter you want to adjust.
- 4 Press the cursor buttons (♦ or ♦) to select setting you desire. The setting is entered automatically.
- Resetting customized sound fields to the factory settings
- Adjustable parameters for each sound field
- Brief descriptions of buttons used to receive broadcasts
- 1 Rotate FUNCTION to select the tuner.
- 2 Press FM/AM to select the FM or AM band.
- 3 Press DIRECT (or D.TUNING).
- 4 Press the numeric buttons to enter the frequency.
- 6 Repeat Steps 2 to 5 to receive another station.
- 1 Rotate FUNCTION to select the tuner.
- 2 Press FM/AM to select the FM or AM band.
- 3 Press TUNING + or TUNING-.
- Presetting radio stations
- 1 Rotate FUNCTION to select the tuner.
- When the receiver reaches either end of the band
- 4 To continue scanning, press TUNING + or TUNING - again.
- 2 Tune in the station that you want to preset using Automatic Tuning (this page).
- 3 Press MEMORY.
- 4 Press SHIFT to select a memory page (A, B or C).
- 5 Select a preset number by pressing PRESET TUNING + or PRESET TUNING -.
- s
- a
- Timing to preset stations
- Brief descriptions of buttons that appear in this chapter
- 1 To index a preset station
- To index a program source
- 2 Tune in the preset station you want to create an index name for.
- 3 Press CURSOR MODE repeatedly until "INDEX" lights up.
- 4 Create an index name by using the cursor buttons:
- To insert a space
- If you've made a mistake
- To assign index names to other stations
- Recording on an audio tape or MiniDisc
- Recording on a video tape
- Setting up the 2 way remote
- To use with the TA-E9000ES
- To use with other components that have the IS logo
- To use with Sony CD players CDP-CX260 or CDP- CX88ES
- 1 Press SET UP repeatedly to display "OTHER SETUP."
- 2 Press the cursor buttons (e or ♦) to select "2 WAY REMOTE."
- 3 Press the cursor buttons (♦ or ♦) to select "ON" or "OFF."
- There's no sound or only a very low>level sound Is heard.
- The left and right sounds are unbalanced or reversed.
- Severe hum or noise is heard.
- No sound is heard from the center speaker.
- Troubleshooting
- Reference sections for clearing the receiver's memory
- Specifications
- FM tuner section
- Video section