Sony STR-DA333ES - Manual (Page 8)

Digital Component Hookups
0
0
K
5’
Q
c
9
1^
T
9
n
0
3
9
9
3
9
3
Connect the digital output jacks of your DVD player and
satellite tuner (etc.) to the receiver's digital input jacks to
bring the multi channel surround sound of a movie
theater into your home. To enjov full effect of multi
channel surround sound, five speakers (two front
speakers, two rear speakers, and a center speaker) and a
sub woofer are required. You can also connect an LD
player u’ith an RF OUT jack via an RF demodulator, like
the Sony MOD-RFl (not supplied).
Required cords
Optical digital cords (not supplied)
Black iSSa: Black
Coaxial digital cord (not supplied)
Yellow m lililí .............. .....- =flHIII lb Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
Example of LD player connected via-en RF demodulator
Please note that you cannot connect an LD player's AC-3 RF OUT jack directly to this unit's digital input jacks. You must
first convert the RF signal to either an optical or coaxial digital signal. Connect the LD player to the RF demodulator, then
coimect the RF demodulator's optical or coaxial digital output to this unit's OPTICAL or COAXIAL DVD/LD IN jack.
Refer to the instruction manual supplied with your RF Demodulator for details on AC-3 RF hookups.
Note
When making connections as shown above, be sure to set INPUT MODE ([^ on page 23) manually. This unit may not operate correctly if
INPUT MODE is set to "AUTO."