Sony STR-DA333ES - Manual (Page 25)

M
MULTI CHANNEL DECODING indicator
This indicator lights when the unit is decoding signals
recorded in a multi channel format,
m 5.1 CH INPUT button
Press to enjoy the audio source connected to the 5.1CH
INPUT jacks with the video from the selected
component.
liSi The following buttons operate the built-in tuner. For
details, see "Receiving Broadcasts" starting from page
37.
MEMORY button
Press to memorize a preset station.
FM MODE button
If "STEREO" flashes in the display and the FM stereo
reception is poor, press this button. You will not have
the stereo effect but the sound is improved.
TUNING +/- buttons
Scans all the available radio stations.
[iH The following buttons operate the built-in tuner. For
details, see "Receiving Broadcasts" starting from page
37.
PRESET TUNING
+/-
buttons
Scans all preset stations.
SHIFT button
Selects a memory page for presef stations.
FM/AM button
Selects the FM or AM band.
133
CURSOR MODE button
Press repeatedly to select any of the following three
cursor modes. The indicator for the selected cursor
mode lights up. The indicator turns off when you
press SET UP.
When cursor mode is You can
SURROUND Change the various surround
parameters (effect level, wall
type, etc.), adjust the volume and
balance of the rear speakers, and
adjust the volume of the center
speaker and subwoofer (page 33)
EQUALIZER Adjust the equalization (bass/
mid/treble) of the front, center
and rear speakers (page 34).
Press the EQUALIZER button to
activate the equalizer.
INDEX Enter an index name for preset
stations and program sources
(page 42)
I
Cursor buttons (♦/♦/♦/♦)
After pressing CURSOR MODE or SET UP, use these
buttons to make specific settings (see pages 16, 33, 42,
and 44)
I
SET UP button
Press repeatedly to select any of the following
indications. The selected indication appears in the
display and you will be able to make various settings
using the cursor buttons.
when you display You can
Speaker setup Specify the front, center, rear
speaker sizes, the rear speaker
position, and whether or not you
are using a sub woofer, (page 16)
Speaker Distance Specify the front, center, and rear
speaker distances and the unit of
measurement, (page 18)
Other Sp>ecify whether the Control A1
II auto function is on or off, and
whether the receiver responds to
the 2 way remote control or not,
(page 44)
■ 0
ft)
ft)
3 a
OP ft)
K
>
3
o
■ o
9
25