Sony STR-DA333ES - Manual (Page 23)

ш
д
1Л
fli
3
а
п
ш
I
INPUT MODE button
Press to select the input mode for your digital
components (DVD/LD, TV/SAT, and MD/DAT).
Each press switches the input mode of the currently
selected component.
Select To
AUTO Give priority to digital signals
when there are both digital and
analog connections. If there are
no digital signals, analog is
selected
ANALOG Specify the analog audio signals
input to the AUDIO IN (L and R)
jacks
DIGITAL (OPTICAL) Specify the digital audio signals
input to the DIGITAL OPT input
jacks
DIGITAL (COAXIAL) Specify the digital audio signals
input to the DIGITAL COAX
input jacks (DVD/LD only)
MASTER VOLUME control
After turning on the component you selected, rotate to
adjust the volume.
[5] MUTING button
Press to mute the sound. The indicator above the
button lights up when the sound is muted.
[H BALANCE control
Rotate right or left to adjust the balance of the front
speaker output.
¡7]
SLEEP button
Press to select the time after which the receiver
tumsoff automatically (see page 43).
[8] SPEAKERS selector
Set according to the front speakers you want to drive.
Setto To select
A The speakers connected to the FRONT
SPEAKERS A terminals
В The speakers connected to the FRONT
SPEAKERS B terminals
A+B* The speakers connected to both the FRONT
SPEAKERS A and B terminals (parallel
connection)
OFF No speaker output
• Be sure to connect front speakers with a nominal impedance of 8
ohms or higher if you want to select both sets (A+B) of front
speakers. When you use both sets (A+B) of front speakers, set the
IMPEDANCE SELECTOR to "4Q" (see page 15).
PHONES jack
Connects headphones.
• To use the headphones, set the SPEAKERS selector to OFF
to output sound to the headphones.
• When the sound field is ON, setting the SPEAKERS
selector to OFF will automatically present a 2 channel
(stereo) downmix from the headphones.
>
3
■ o
О
TS
Ф
23