Sony STR-AV910 - Manual (Page 25)

Memorizing a New Equalization Curve
You can store a created equalization curve into memory under any EQUALIZE MODE you select. However, note that this
operation will alter the factory-preset equalization cun« or the last memorized one under the selected EQUALIZER
MODE.
1
2
3
4
Create an equalization curve you want to store.
Press EQ MEMORY SET. The MEMORY
indicator will light up for a few seconds.
Select a equalizer mode under which you want
to store the equalization curve.
Press EQ MEMORY WRITE.
To return to the factory preset equalization curve
Select CURSOR MODE SURROUND and turn the
SYSTEM POWER off.
Turn on the SYSTEM POWER while pressing
SURROUND MODE A.
Surround Mode returns to the factory preset also.
To listen to a music with a memorized
equalization curve
Select the desired equalizer mode.
If you have not stored a curve under that MODE, the
factory-preset curve will be called in.
Note
Graphic equalizer and surround do not have any effect on the
program source connected to the TAPE 2 MONiTOR. To listen to a music without graphic equalizer effect
Press EQUALIZER ON/OFF button to set it to off.
To accurately check the highest input
Press the PEAK HOLD button.
The real time analyzer display will hold the highest input of each
frequency range for several seconds.
25