Vídeo operations – Sony STR-AV910 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Vídeo Operations
Adding the Desired Sound on a Video Tape during Editing
During video tape editing, you can add the desired sound on the recording-side video tape from various audio program sources.
Audio Dubbing during Video Tape Editing with the STR-AV1010
1
Select the playback side VCR with the EDIT
VIDEO button.
1
Ami
or 1
Am3
will appear In the VIDEO EDIT
display area
1.a-2:forVCR2
1.a-3:forVCR3
2
Insert a recorded video tape into the playback-
side VCR and set the VCR to the playback
mode.
3
At the point where audio dubbing is to start, press
the PAUSE button on the playback-side VCR.
4
Press EDIT AUDIO.
5
Select the audio program source with the
appropriate function selector.
G Release the PAUSE mode of the playback-side
VCR and set VCR 1 to the recording mode.
7
Start the selected audio program source.
Audio dubbing wiil start.
Audio Dubbing during Video Tape Editing with the STR-AV910/710
1
Press VIDEO 2/CDV.
2
Insert a recorded video tape into VCR 2 and
set the VCR to the playback mode.
3
At the point where audio dubbing is to start,
press the PAUSE button on VCR 2.
4
Press EDIT AUDIO.
5
Select the audio program source with the
appropriate function selector.
6
Release the PAUSE mode of VCR 2 and set
VCR 1 to the recording mode.
7
Start the selected audio program source.
Audio dubbing will start.
32