Video tape editing with the str-av1010, Preparation, Video tape editing with the str-av910/710 – Sony STR-AV910 User Manual
Page 31: Pr^ration
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Video Tape Editing with the STR-AV1010
Preparation
• Turn on the unit and the equipment to be used.
• If the AUDIO indicator is lit in the VIDEO EDIT
display, press the EDIT AUDIO button to make the
Indicator go out.
1
Select the playback*side VCR using the EDIT
VIDEO button.
1.^: for VCR Z
1.4-
3: for VCR 3.
1.4-
2 or 1
^2
will be indicated in the VIDEO
EDIT display area.
2
Select the input video signal source for the
monitor TV with the function selectors.
VIDE02/CDV:forVCR2.
VIDEOS: for VCR a
3
4
Set the playback-side VCR to the playback
mode.
Set VCR 1 to the recording mode.
Editing will begin.
Video Tape Editing with the STR-AV910/710
Pr^ration
• Turn on the unit and the equipment to be used.
• if the AUDIO indicator is iit in the dispiay window,
press the EDIT AUDIO button to make the indicator
go out.
1
Press VIDEO 2/CDV.
2
Set VCR
2
to the playback mode.
3
Set VCR 1 to the recording mode.
To switch the playback-side VCR during editing with the STR-
AV1010
Press EDIT VIDEO. Each time you press the button, the playback-
side VCR switches from VCR 2 or 3 to VCR 3 or 2.
To view the other video sourcefs) on the monitor TV during
editing
Press the appropriate FUNCTION selector.
• VIDE01, VIDEO 2/CDV, or VIDEO 3 with the STR-AV1010.
• VIDE01 or VIDEO 2«DDV With the STR-AV910/710.
Listening to an audio program during video tape editing
I.Press the appropriate FUNCTION selector.
2.Start the selected audio program source.
31