Connecting the glasstron, Connecting the pc, Connecting other ibm compatible pcs – Sony PLM-S700 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I; J ^
’>- • '
Connecting the Glasstron
When connecting the Glasstron to other equipment, use the supplied cables.
Note
If you use the commetdally available cables, and the performance is reduced, check the performance
using the supplied cables.
Connecting the PC
Be sure to turn off your PC before connecting the power supply box.
Notes
• Do not use the RGB signal cable (HD15), which is 6.5 feet (2m) or longer. The performance may be
reduced.
• Refer to the irrstruction manual supplied with your PC as well.
• Depending on your computer, the audio port is indicated as LINE OUT, headphone, speaker, etc.
• Adjust sound volume on the computer.
Connecting other IBM compatible PCs
Connect the Glasstron to your PC using the supplied RGB signal (HD15) cable. When you
connect the Glasstron to your PC, set the PC-VIDEO switch on the power supply box to "PC."
Set the PC-VIDEO switch
to "PC."
Power supply box
to monitor port I I to audio port
or
to monitor port
PC
RGB
AUDIO
to audio port to PC AUDIO I
connector
Audio cable (supplied)
to RGB connector
—
------------------------------
RGB signal cable (supplied)
: Signal flow
continued
15-